General Purpose without Tank - Spray Mist Coolant Systems, Mill Coolant, Tool Coolant, Lathe Coolant, Machining Coolant

General Purpose Without Tank

Models For Use With Your Own Tank or Sump

General Purpose Models

These models are to used with your own Tank or Sump. Our General Purpose models are best used in production operations that require minimal set up changes. This unit is a similar design to our Lite Duty, but equipped with longer lines and nozzles for heavier use. The general purpose models generate a wider spray traveling a further distance than the Lite Duty models. Air supply required.

General Purpose models include the following features:

Simplest of the Systems: The controls of these units are mounted permanently to the machine, close to the operator and the cut.

No Coolant Tank Furnished:Coolant mix may be placed in the machine sump, or in any clean container that will not contaminate the coolant. If the sump is usedthe conventional flood coolant pump must be made inoperative.

Coaxial Coolant Line: Coolant and compressed air are not mixed until they reach the nozzle. To overcome the need for dual lines, Kool Mist has developed a coaxial line, or a hose within a hose. Coolant line exteriors may be nylon braided for normal duty, or metal braided from protection from hot chips and abrasion.

Easy to Use Control: Output from each nozzle is regulated by a single knob on the control. Mist Spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Nozzle position can be apermanent mount or the flexible magnetic base. Straight nozzle is standard. 45 and 90 deg. nozzles are available.

Click on picture for larger version

101N

Model 101F Closeup

101F

112NF12

Models Available

general purpose without tank